Schneider Galaxy VS UPS (20-150 kW)
Galaxy VS is a highly efficient, modular, easy-to-deploy 20 to 150 kW (400V/480V) and 10 to 75 kW (208V), three phase UPS that delivers top performance for edge, small, and medium data centers, as well as critical infrastructure in commercial and industrial facilities. Its compact design, high-density technology and fault-tolerant architecture maximize availability, operational efficiency, and critical load protection, while minimizing total cost of ownership.
This UPS delivers up to 97% efficiency in normal operating mode and up to 99% in ECOnversion mode, equivalent to 66% higher energy savings, in addition to being EcoStruxure.
- Voltage: Input – 200V, 208V, 220V, 480V | Output – 200V, 208V, 480V, 600V
- Built-in backfeed protection
- Compatible with Schneider Electric’s lithium ion battery solution
- Embedded Network Management Card
- Flexible DC bus
- Parallel-capacity capable
- Parallel-redundant capable
- ECOnversion mode
- Compact UPS
Schneider Galaxy VM UPS (160-225 kVA)
Galaxy VM is a key component in the comprehensive Schneider Electric energy management solution for data center and industrial applications. Galaxy VM deploys state of the art technology to lower energy cost through very high efficiency ratings and the newly innovative ECOnversion mode. The Galaxy VM three phase UPS seamlessly links to your electrical network using state of the art electrical performances like very wide input voltage range, high overload and short circuit capacity, and integrated back feed protection, providing excellent power quality. The highly compact Galaxy VM also links in with your facility monitoring systems and smart grid requirements and offers both traditional and modular energy storage flexibility that allows tailoring of the solution to specific needs. Galaxy VM features top and bottom cable entry without the need for an additional side cabinet, full front service access, back to the wall installation, and included start up service, making it one of the easiest UPSs in its class to deploy, install and maintain.
- Voltage: Input – 480V | Output – 208/120V, 480V, 600V
- Single or Dual mains input
- Up to 96.5% efficiency in double conversion online mode even at low load level
- Ultrahigh efficiency up to 99% in ECO
- Large color touch-screen display
- Industry-leading footprint
- Full front access
- 65 kAIC rating
- ENERGY STAR® qualified
- Wide input voltage and frequency ranges
- Genset compliant with adaptive ramp-in
- Integrated parallel capability up to four UPS units
- Integrated network management capability for easy access to the network
- Modbus (SCADA and ION-E) capability
Schneider Galaxy VL UPS (200 – 500 kW)
Galaxy VL is a highly efficient, compact, modular, and scalable 200-500 kW (400 V/480 V) three-phase uninterruptible power supply (UPS) available worldwide that delivers top performance for medium, large, and edge data centers, as well as critical infrastructure in commercial and industrial facilities.
Its industry-leading, compact, high-density technology, and fault-tolerant architecture maximize availability, operational efficiency, and critical load protection while minimizing total cost of ownership (TCO). Thanks to patented technologies, this UPS delivers up to 99% efficiency in ECOnversion™ mode and up to 97% efficiency in double conversion mode.
Galaxy VL’s scalability enables you to pay-as-you grow, reducing both capital investment and TCO. You can buy the power modules you need up-front, and enjoy optimized operating efficiency, then add power modules with Live Swap as demand grows. The modular design also enables N+1 internal redundancy, which multiplies by 10 the system’s availability with no extra footprint.
Galaxy VL is compatible with Lithium-ion batteries. With our Schneider Electric Lithium-ion battery solution, classic VRLA, or NiCd batteries, critical loads have highly predictable runtimes.
Galaxy VL is EcoStruxure™ connected to give you peace of mind anytime, anywhere. Start-up service is included to optimize your system’s performance, quality, and safety. With Live Swap, modular design, and superior reliability, Galaxy VL is the ideal backbone for your critical infrastructure.
Schneider Galaxy VX UPS (500-1500 kW)
The Schneider Electric Galaxy VX three phase UPS is a scalable, high-performance extension of the Galaxy V-Series solutions, designed for large data center and industrial applications.
Lower your energy costs and meet changing business requirements, with 99% efficiency in ECOnversion mode. Highly efficient 3-phase power protection with flexible operating mode from 500 to 1500 kW. Provide excellent power quality in demanding electrical environments. Manage your power anywhere. Galaxy VX supports local and remote communication via 7-inch LCD touch screen provides graphical overview of systems layout, status, alarms, and event history.
- Voltage: Input – 480V, 600V | Output – 480V, 600V
- Dual mains input, top or bottom cable entry feed
- Modular, scalable, and redundant configurations to adapt to real facility needs
- Scalable from 500 kW to 1500 kW, parallel capable up to 2,000 kW
- Parallelable for redundancy (4 MW N+1)
- Four-level inverter technology, increasing UPS reliability and availability
- Up to 99% efficiency in Eco mode
- Two optional Network Management Cards
- Flexible energy storage solutions, including support for Li-ion batteries
- Fully rated system with kVA = kW at 40°C
- 7 inch color touch-screen display with a separate mimic diagram
- Innovative four-level inverter reduces losses and component stress, leading to higher efficiency and component reliability
- Configurable internal redundancy provides a fault-tolerant design
- A 125% rating continuous-duty static switch provides robust overload capabilities
- Back-to-back or against-the-wall installation — no rear entry required
Schneider Symmetra PX 20/40/100 UPS (10-100 kVA)
The Symmetra PX is a world class, redundant, scalable, 3 Phase UPS power protection system designed to cost effectively provide high levels of availability. Seamlessly integrating into today’s state-of-the-art data center designs, the Symmetra PX is a true modular system. Made up of dedicated and redundant modules–power, intelligence, battery and bypass, all engineered into a design that is easily and efficiently serviceable, this architecture can scale power and runtime as demand grows or as higher levels of availability are required. Symmetra PX serves as the power train that drives InfraStruXure® systems for small and medium data centers but can also power individual “zones” of larger data centers. Highly manageable, the Symmetra PX features self-diagnostic capabilities and standardized modules which mitigate the risk of human error resulting in increased overall data center reliability.
- Voltage: Input – 208V, 480V, 600V | Output – 208/120V
- Add power modules to increase capacity in 10 kW increments
- Scalable up to 100 kW for capacity or 90 kW N+1 for redundancy
- High-efficiency power modules (95% efficiency)
- Swappable power and battery modules for easy expansion and fast meantime to repair
- Self-diagnosing, field-replaceable modules
- ENERGY STAR qualified
- Modular batteries with Intelligent battery management
- Rack based for agility and aesthetics
- Embedded network management
- Remote access over HTTP, HTTPS, Telnet, SSH, SNMP
Schneider Symmetra PX 250/500 UPS (100-500 kVA)
The Schneider Electric Symmetra PX 250/500 UPS is a world-class, high efficiency power protection system designed to cost effectively provide high levels of availability while simplifying the rightsizing of your data center. Symmetra PX 250/500 is a true modular system consisting of swappable power modules, battery modules, a static bypass switch, and intelligent management modules that facilitate easy and efficient service. This architecture can scale power and runtime as demand grows or as higher levels of availability are required. The Symmetra PX 250/500 systems can scale in increments of 25 kW up to 500 kW, and four systems can be paralleled to deliver up to 2,000 kW of power protection (1.5 MW with N+1 system-level redundancy)
- Voltage: Input – 480V, 400V | Output – 480V, 400V
- Dual mains input, top or bottom cable entry feed
- Scalable 25 kW power modules
- Scalable from 100 kW to 500 kW, parallel capable up to 2,000 kW
- Parallelable for redundancy (1.5 MW N+1)
- Swappable power, battery, and intelligence modules
- Flexible energy storage solutions, including support for Li-ion batteries
- Tool-less module replacement
- Self-diagnosing, field-replaceable modules
- Redundant intelligence module
- Swappable static bypass switch
- High efficiency in full protection mode (96% at 50% load)
- Up to 99% efficiency in good power conditions with ECO Mode
- External source synchronization
- Unity power factor corrected
- Integrated monitoring of battery modules
- Energy monitoring displays kWh output of each UPS
- Embedded network management
- Remote access over HTTP, HTTPS, Telnet, SSH, SNMP v1, and SNMP v3
- Local access at touch-screen display interface
